Managed IP Phone Appearance Configuration

Use this page to add or edit managed IP phone station appearances.

Label

Enter the label displayed on the line key of the IP phone.

Extension

Enter the extension number for this station appearance.

Identification Address

Enter the unique SIP ID address (containing no spaces) for this station appearance. This is a required field.

Line Keys

Select the number of contiguous line keys dedicated to this station appearance from the pull-down list. The number of line keys cannot be increased unless there are line keys available. The Interaction SIP Station is currently limited to one line key.

Calls per Line Key

Select the number of calls from the pull-down list that come into each individual line key. The default is 1. The Interaction SIP Station is currently limited to one call per line key.

Security

This option is not currently available for Interaction SIP Stations.

This option is available only when you select SRTP as the Audio Protocol.  

Select Minimal to hide the display of an open-lock icon on non-secure calls In the CIC clients. Select End-to-Edge to display the open-lock icon when a call, or at least one segment of a call in the CIC system domain is or becomes non-secure. See SIP Line Transport for more information.

Ring Set

This option is not available for Interaction SIP Station.

Select the ring set to apply to this managed IP phone. By default, the <Default - Polycom> ring set is applied. The ring sets available depend on the configured ring sets. Select <Local Phone Settings> on the station to use the ring as chosen locally on the IP phone.

Sharable

This setting does not apply to Interaction SIP Station or to SIP Soft Phones.

Select this check box if this station appearance is sharable, and therefore can be added as a shared  appearance.

Auto Conference

This setting applies only to Polycom stand-alone phones.

If this check box is selected, and if a call is already connected or held at the station, a conference is created between the new incoming call and the existing call(s). An announcement of the new call is played to the existing call(s) before the conference is established.

PIN

If you enabled auto conference you must enter the Personal Identification Number.