Restore Factory Defaults

If you properly configured the RAID, you can restore the device to factory settings. The reimaging software resides on an internal USB flash drive. To access the internal drive, modify the BIOS start sequence to start from the USB drive instead of RAID, or do a one-time startup override described in the following steps.

1. Restart your computer. The HP ProLiant Power-On Self-Test (POST) runs.

2. Press F11 to enter the Boot Menu.

3. Select Internal USB and then press Enter.

   

4. Wait for the system to start. When the system completes the process, the Welcome to the Interaction Recovery Environment window appears.



5. Ensure that the Factory Image is selected and then click Restore Image. The system requests confirmation of the recovery operation.

6. Click Confirm.

7. Wait while the device is reset to factory defaults, which can take several minutes. The process is complete when Factory reversion complete appears.

8. Click Restart.

9. Click Yes.