Contents

Setting Advanced Options

From the Options dialog box, click Advanced Options to configure the following options:

Page Header

A fax page header is the space in the top ¼ to ½ inch (0.635 to 1.27 cm) margin on each page. It typically contains the sending company’s name and/or fax number since anonymous faxes are considered illegal in many places.

Retries

Select Attempt to resend failed faxes to continue to send a fax if it has failed.
Enter a positive whole number in the Number of retries field indicating how many times the server should try to send the fax if it fails to send it on the first attempt (e.g., the line is busy or down). The maximum number of retries is 12.
Enter a positive number in the Delay between retries field to indicate how many seconds between retries. The delay between retries can to 5 to 300 seconds.

Fax Device Configuration

If more than one fax or group of faxes is installed on the Interaction Fax Server, you can select which fax or fax group to use.

Select a device group from the Device Group list.

Select a device group, or select the asterisk (*), which uses the first group available.
Enter a Station ID.
Select a transmission speed from the Transmission Speed list.

Note: If you need help with these settings, check with your CIC or network administrator to find out what settings you should use.

Language Settings

If you have language packs installed, you can select the language for the user interface.