Feedback

  • Contents
 

Incoming Fax Initiator

This initiator starts any time a new incoming fax comes into the system.

Initiator Properties Page

For more information on the relationship between the parameters on the Initiator Properties page, see Introduction to Initiators.

Notification Object Type

Fax Envelope

Object ID

Select {all}.

Notification Event

Select Incoming Fax.

Outputs

Fax Envelope ID

The unique identifier for a Fax Envelope.

Fax ID

The unique identifier for a fax.

Call Identifier

The unique identifier for a call a fax comes in on. Call Id can be useful for obtaining information about the call. You can route a fax based on who a fax comes from, or route based on some other attribute.

T.30 Subaddress received with fax

A handshake protocol used by the machine sending the fax. This information can be used to identify who sent a fax. See the documentation that accompanied your fax hardware for more information.

Fax device on which this fax was received

The identifier for the fax station (stand-alone fax, SCBus fax, etc) that received the fax. This value is one of the fax stations set up in Interaction Administrator.

Remote Calling Station Identifier

The ID of the Remote Calling station. This information is sent by the remote fax. It can be useful when a fax is forwarded in email.

Call Duration

The length of the fax transmission in seconds.

Fax Transmission Rate

The transmission rate at which the fax was received.

Exit Paths

Start

This step always exits through the start path.